Odorcide 210 Original Concentrate Master Case
(6-64 oz. bottles)
ONE TIME ODOR ELIMINATION
For carpet, locate the source of the odor (a black light or moisture probe may help identify urine deposits) and treat after vacuuming loose dirt and debris. Mix concentrate with water at a rate of 1:16 (8 oz per gallon) and saturate 50% beyond the actual “spot” area. For general carpet deodorizing, add odorcide directly to the cleaning extraction system insuring it penetrates to the odor source. Increase penetration by using a roller, hand manipulation or by “walking” the product in.
ON-GOING ODOR ELIMINATION
Dilute with water or cleaning solution at a rate of ½ oz per gallon. Apply to common areas with mop, sponge or trigger sprayer. Use higher dilution for more severe odor situations.
All Thornell products are safe for use on any surface. As with any product, follow the label directions. Contains water, proprietary essential oil blend and preservatives.
Keep out of the reach of children. For external use only.
Effectiveness decreased when using with Chlorine solutions. Always spot test for color fastness.
Q: Is it an enzyme?
A: No. Odorcide is not an enzyme. Odorcide uses a chemistry called Zwaademaker Conjugates. This process bonds, absorbs and then counteracts the odor molecules ability to emit a vapor. The result is complete elimination of the odor.
Q: Does it work on cat urine?
A: Yes. Odorcide will eliminate the odors caused by pet urine. Simply identify the source and make sure Odorcide is used in a manner that will ensure contact with the odor molecule.
Q: Can you use it on oriental or wool rugs?
A: Yes. Odorcide is safe for use on rugs and carpets of all kinds. Rugs need to be treated front and back. A dip tank is best if available.
Q: Does it leave a residue?
A: No. Odoricide is a water based product thus no residue is left behind.
Q: Does it attract dirt?
A: No. Odorcide is non-ionic with a neutral Ph thus it does not attract dirt or debris after use.
Q: Will it hurt the finish on my floor?
A: No. Odorcide is a water based product and contains no caustic ingredients that will damage the floor surface.
Q: Do I need to extract it?
A: Once Odorcide is applied its best to leave it until you are certain it has penetrated deeply enough to come in contact with the odor source. As many of the problems areas are on wood or concrete flooring, this process may take a few minutes. Odorcide needs to penetrate both of these hard surfaces to adequately reach the odor molecule. Once you are certain the penetration process is complete, you can extract the excess or you can simply let it air dry. If you are cleaning in addition to deodorizing, you can remove the excess during your cleaning procedures.
Q: What’s in it?
A: The actual formula is proprietary but in general terms Odorcide is made up of a blend of natural ingredients that are safe for use on any surface to include leather chairs and hard wood floors. It is always recommended that you spot test before applications and as with all chemicals please keep them out of children’s reach.