BE Pressure DoubleWire100, 85.238.211, 2-Wire Braid Steel 5000 PSI 3/8in x 100 ft Pressure Washing Hose with Quick Connects

Description

The BE Pressure DoubleWire100 (85.238.211) is a commercial-grade 3/8" ID x 100 ft high-pressure washing hose rated for up to 5000 PSI and maximum temperatures of 310°F. Built with heavy-duty dual wire braid reinforcement and pre-installed 3/8" quick-connect fittings, this hose is designed for extreme duty in professional pressure washing and industrial cleaning environments.

Features

• Dual Steel Wire Braid Reinforcement: Constructed with double high-tensile wire braid layers for exceptional burst strength, pressure retention, and abrasion resistance under continuous commercial use.
• High-Pressure Performance: Engineered for heavy-duty pressure washing systems with working pressures up to 5000 PSI.
• Extreme Temperature Rating: Handles hot water and steam applications with continuous operating temperatures up to 310°F.
• Pre-Installed Quick-Connect Fittings: Equipped with a 3/8" quick-connect plug on the inlet and a 3/8" quick-connect swivel end on the outlet for rapid equipment setup.
• Integrated Heavy-Duty Bend Restrictors: Molded red strain-relief bend restrictors minimize kinking at stress points near fittings to extend overall service life.
• Chemical and Oil Resistant Cover: Non-marking, durable synthetic rubber outer layer resists weather, ozone, oils, and harsh cleaning detergents.

Applications

• Commercial and Industrial Pressure Washers: Compatible with gas and diesel engine hot or cold water pressure washing units.
• Surface Cleaning & Building Restoration: Ideal for concrete cleaning, facade washing, roof cleaning, and heavy machinery washdowns.
• Truckmount & Trailer Rig Systems: Fits high-output moble wash trailers, carpet extraction truckmount units, and industrial wash bays.
• Contractor Fleet Maintenance: Built for daily rigorous field use across property maintenance and sanitation applications.

Specifications

Cross-Reference SKUs

Tips and Additional Information

Proper installation and care ensure peak performance and longevity from your high-pressure hose. Always inspect the hose line prior to pressurization for signs of outer cover abrasion, cuts, wire exposure, or damaged quick-disconnect O-rings. Ensure quick-connect couplers click securely into place before starting the pressure washer pump. When routing hose lines, avoid dragging over sharp metal edges or hot engine exhaust components. Flush clear water through hot-water systems after detergent application to prevent chemical buildup within the inner tube core. Note: The pre-installed swivel connector is designed to relieve hose torsion during setup and maneuverability; it is not intended as a high-speed continuous live rotary union for high-speed hose reels.

Frequently Asked Questions

Q: What is the maximum pressure and temperature rating for the BE DoubleWire100 hose?
A: The DoubleWire100 hose (part # 85.238.211) is rated for a maximum working pressure of 5000 PSI and maximum hot water operating temperatures up to 310°F.

Q: Are quick-connect fittings pre-installed on this hose?
A: Yes, this hose assembly comes completely factory-assembled with a 3/8" steel quick-connect inlet plug and a 3/8" quick-connect swivel outlet coupler along with protective red bend restrictors.

Q: What is the advantage of a 2-wire braid hose versus a 1-wire braid hose?
A: A double (2) wire braid hose features two layers of woven steel reinforcement, providing higher pressure handling (5000 PSI), enhanced safety burst resistance, and extended durability against kinking and crushing compared to single wire braid hoses.

Q: Can I use this hose on both cold water and hot water pressure washers?
A: Absolutely. The hose materials are rated for ambient cold water cleaning as well as extreme hot water and steam pressure washing applications up to 310°F.

Warranty & Safety Information

BE Pressure products are backed by standard manufacturer defect warranties covering material and workmanship errors. Never operate high-pressure hose assemblies beyond their rated working pressure of 5000 PSI or maximum temperature limit of 310°F. Do not disconnect hose lines under fluid pressure. Inspect fittings, quick-connect O-rings, and hose jackets regularly; replace immediately if wire braiding becomes frayed or exposed. Using non-live swivels in rapid continuous rotation applications or allowing hoses to kink repeatedly near end couplings can void manufacturer warranty coverage.