Steam-Brite 20261022 SAE 100R5 Hydraulic Hose Field Repair Kit
4-Piece Reusable Hydraulic Hose Repair Kit with 3/8" Male Pipe Connections and Swivel Adapters
The Steam-Brite 20261022 Hydraulic Hose Field Repair Kit contains four components designed to provide multiple connection configurations when repairing compatible SAE 100R5 hydraulic hose assemblies.
The kit includes two reusable hydraulic hose repair ends, one male-to-female pipe swivel adapter, and one female-to-female pipe swivel adapter.
The reusable hose ends are intended for manufacturer-approved SAE 100R5 textile-covered, single-steel-wire braided hydraulic hose.
This kit is designed for qualified hydraulic equipment technicians, industrial maintenance departments, commercial truck repair facilities, agricultural equipment mechanics, and mobile hydraulic service companies.
IMPORTANT: SAE 100R5 HOSE ONLY
THIS KIT IS NOT DESIGNED FOR MOST 3/8" ID, 4,000 PSI PRESSURE WASHER HOSES.
The reusable hose repair ends included in this bundle are intended for compatible SAE 100R5 hydraulic hose with a textile outer covering.
DO NOT USE WITH:
- Standard SAE 100R1 hydraulic hose
- Standard SAE 100R2 hydraulic hose
- Most 3/8" ID 4,000 PSI pressure washer hoses
- Most commercial hot-water pressure washing hoses
- Most carpet cleaning truckmount solution hoses
- Most portable carpet extractor solution hoses
- Most tile and grout cleaning pressure hoses
- Most sewer jetting and drain cleaning hoses
- Any hose not specifically approved for these reusable fittings
A hose having one steel-wire braid does not automatically make it compatible with SAE 100R5 reusable fittings.
Incorrect hose and fitting combinations can cause leakage, fitting separation, equipment damage, serious injury, or death.
What Is Included in Steam-Brite Kit 20261022?
This bundle contains four individual components representing three different fitting designs.
| Qty |
Part Number |
Description |
| 2 |
Steam-Brite 20261338 |
Reusable hydraulic hose repair end for approved SAE 100R5 textile-covered hose. 3/8" Male Pipe connection. |
| 1 |
Clean Storm 000-052-019 |
3/8" Male Pipe x 3/8" Female Pipe steel swivel adapter. Non-live swivel design. |
| 1 |
Clean Storm 1405-0606 |
3/8" Female Pipe x 3/8" Female Pipe steel swivel adapter. Non-live swivel design. |
Total Bundle Quantity: 4 pieces
.jpg)
Steam-Brite Bundle Number: 20261022
Five Hydraulic Hose Repair Configurations
The included reusable hose ends and adapters allow several different connection arrangements when used with an approved SAE 100R5 hose assembly.
Option 1: Fixed Male Pipe x Fixed Male Pipe
Install one reusable male pipe fitting on each end of an approved hose.
Connection: 3/8" Male Pipe x 3/8" Male Pipe.
Option 2: Swivel Male Pipe x Fixed Male Pipe
Use the appropriate male-to-female swivel adapter with a reusable male pipe hose end to provide installation swivel capability.
Connection: 3/8" Swivel Male Pipe x 3/8" Fixed Male Pipe.
Option 3: Swivel Female Pipe x Fixed Male Pipe
Install the female-to-female pipe swivel adapter on one reusable male pipe hose end.
Connection: 3/8" Swivel Female Pipe x 3/8" Fixed Male Pipe.
Option 4: Swivel Female Pipe x Swivel Male Pipe
Combine the reusable hose ends with the appropriate swivel adapters to provide a female pipe swivel connection on one end and a male pipe swivel connection on the other.
Connection: 3/8" Swivel Female Pipe x 3/8" Swivel Male Pipe.
Option 5: Repair a Damaged Section in the Middle of a Hose
When permitted by the hose and fitting manufacturers, a damaged section of compatible SAE 100R5 hose may be removed and the remaining serviceable hose sections reconnected.
Install one reusable male pipe fitting on each prepared hose end and connect the two fittings using the included female-to-female pipe swivel adapter.
Important: A repaired hose must meet all applicable manufacturer requirements for hose condition, assembly, inspection, and pressure testing.
Swivel Notice: The swivel adapters included in this kit are non-live swivel fittings. They are intended to rotate during installation and alignment, not continuously while equipment is operating.
What Is SAE 100R5 Hydraulic Hose?
SAE 100R5 is a hydraulic hose specification commonly used in commercial transportation, industrial machinery, agricultural equipment, and selected mobile hydraulic systems.
Typical SAE 100R5 hose construction includes:
- Oil-resistant synthetic rubber inner tube
- Textile reinforcement
- One braided steel-wire reinforcement layer
- Textile braided outer covering
SAE 100R5 differs from standard SAE 100R1 and SAE 100R2 hydraulic hose in its construction, dimensions, and fitting requirements.
Reusable fittings designed for R5 hose are not automatically interchangeable with fittings intended for R1 or R2 hose.
SAE 100R5 Hose Sizing Information
SAE 100R5 uses a nominal sizing system that differs from many conventional hydraulic and pressure washer hoses.
| R5 Dash Size |
Actual Inside Diameter |
| -04 |
3/16" |
| -05 |
1/4" |
| -06 |
5/16" |
| -08 |
13/32" |
Do not assume that a fitting identified as R5 dash -06 fits conventional 3/8" ID hose.
Before ordering or installing this kit, verify the actual hose inside diameter, outside diameter, construction, and manufacturer-approved fitting series.
Industries That Commonly Use SAE 100R5 Hose
Commercial Trucking and Transportation
SAE 100R5 hose is used in selected hydraulic, lubrication, and transportation applications on commercial trucks, trailers, and buses.
Examples include approved hydraulic fluid lines, lubrication systems, and certain transportation hose assemblies.
Air brake applications require separately approved hose and fitting combinations. This kit is not represented as DOT-approved for air brake service.
Agricultural Equipment
Agricultural equipment may use SAE 100R5 hose in selected hydraulic and lubrication systems.
- Farm tractors
- Harvesting equipment
- Agricultural implements
- Hydraulic control systems
- Farm equipment maintenance
Construction and Heavy Equipment
Some construction and mobile hydraulic equipment uses SAE 100R5 hose.
- Wheel loaders
- Excavators
- Industrial lifting equipment
- Mobile hydraulic machinery
- Heavy equipment lubrication systems
Industrial Manufacturing
SAE 100R5 hose may be used in approved industrial hydraulic applications.
- Hydraulic power units
- Manufacturing equipment
- Industrial machinery
- Hydraulic control circuits
- Industrial oil circulation systems
Fleet Maintenance and Mobile Hydraulic Repair
Commercial fleet maintenance departments and mobile hydraulic repair technicians may encounter SAE 100R5 hose on equipment requiring approved field-attachable fittings.
Reusable fittings can reduce equipment downtime when properly matched to the specific hose construction.
Industrial Lubrication Systems
Selected SAE 100R5 hose products are used with petroleum-based hydraulic fluids and lubricating oils.
Fluid compatibility, operating pressure, and temperature limitations must be verified with the hose manufacturer.
Industry Hose Fitting Cross-Reference Information
The following part numbers identify the individual components included in this Steam-Brite bundle.
| Part Number |
Description |
| 20261022 |
Complete Steam-Brite 4-Piece R5 Hose Repair Bundle |
| 20261338 |
Reusable SAE 100R5 Hose Repair End |
| 000-052-019 |
3/8" Male Pipe x Female Pipe Swivel Adapter |
| PHY052-019 |
Related Male/Female Swivel Adapter Reference |
| 6M-6UFS |
Related Male/Female Swivel Adapter Reference |
| 140466 |
Related Male/Female Swivel Adapter Reference |
| 1405-0606 |
3/8" Female Pipe x Female Pipe Swivel Adapter |
| 1405-06-06 |
Alternate Female Pipe Swivel Adapter Reference |
| 1405-6-6 |
Alternate Female Pipe Swivel Adapter Reference |
| AD6FP-6FPX |
Related Female Pipe Swivel Adapter Reference |
Cross-Reference Disclaimer: These references identify bundle components or similar adapter configurations. They are not all replacement numbers for the complete four-piece kit.
Cross-reference numbers for SAE 100R1 reusable hose fittings have intentionally been excluded because R1 fittings are not automatically compatible with R5 hose.
Why This Kit Does Not Work With Most 4,000 PSI Pressure Washer Hoses
Most commercial 3/8" ID pressure washer hoses rated for 4,000 PSI use hose construction different from SAE 100R5.
These hoses may use one or more steel-wire reinforcement layers with rubber or other outer coverings.
Even when a pressure washer hose contains one steel-wire braid, its outside diameter, reinforcement location, and fitting attachment requirements may differ.
The reusable hose ends in this kit are not universal fittings for 4,000 PSI pressure washer hose.
Do not select this kit based only on hose inside diameter or pressure rating.
Why This Kit Does Not Fit Most Carpet Cleaning Hoses
Professional carpet cleaning truckmounts, portable extractors, and tile cleaning machines commonly use high-pressure solution hoses with construction different from SAE 100R5.
Many of these hoses are designed for hot water and cleaning solutions.
The fact that a hose is described as single-wire braided does not mean it accepts SAE 100R5 reusable fittings.
This kit is not recommended for most carpet cleaning or tile cleaning solution hose repairs.
Reusable Hose Fittings vs. Crimp Fittings
Conventional hydraulic hose assemblies frequently use permanently attached crimp fittings.
Reusable hose fittings are designed for attachment to specifically approved hose constructions without requiring a hydraulic crimping machine.
This can be useful for maintenance and field repairs when the exact hose and fitting combination is approved.
Reusable fittings are not universal. A fitting designed for one hose construction may not safely attach to another hose having the same nominal inside diameter.
Installation and Safety Information
Reusable hydraulic hose fittings should be installed only by qualified personnel familiar with hydraulic hose assembly.
- Shut down the equipment and completely relieve system pressure.
- Verify that the hose is the exact manufacturer-approved SAE 100R5 hose construction.
- Confirm the actual hose inside diameter and outside diameter.
- Inspect the hose for damage, deterioration, and compromised reinforcement.
- Follow the fitting manufacturer's installation instructions and required assembly dimensions.
- Verify that the swivel adapters are suitable for the intended connection and sealing method.
- Inspect and pressure-test the completed assembly according to applicable manufacturer requirements.
- Never exceed the lowest working pressure rating of any component in the completed assembly.
Safety Warning: Never use your hands to locate a leak in a pressurized hydraulic system. High-pressure fluid injection injuries require immediate emergency medical attention.
Frequently Asked Questions
Will this kit repair my 3/8" ID 4,000 PSI pressure washer hose?
No, not in most cases. The reusable fittings are designed for approved SAE 100R5 hose. Most 4,000 PSI pressure washer hoses use different hose construction.
Will this kit work with SAE 100R1 hose?
No. SAE 100R1 and SAE 100R5 have different hose construction and fitting requirements.
Will this kit work with SAE 100R2 hose?
No. SAE 100R2 is a different hose construction and is not approved for these R5 reusable hose ends.
Can I use this kit on carpet cleaning solution hose?
Usually not. Most carpet cleaning solution hoses are not SAE 100R5 textile-covered hydraulic hose.
Does this kit require a hydraulic hose crimping machine?
No. The reusable hose ends are field-attachable when installed on an approved hose according to the manufacturer's instructions.
Can this kit repair a damaged section in the middle of a hose?
The included female-to-female swivel adapter can connect two properly assembled male pipe hose ends.
However, an in-line hose repair must be permitted by the hose and fitting manufacturers and must meet all applicable safety and testing requirements.
Are the swivel adapters designed for continuous rotation?
No. These are non-live swivel adapters intended for installation and connection alignment.
Is this a 4,000 PSI hydraulic hose repair kit?
No 4,000 PSI rating is claimed. The allowable working pressure depends on the exact approved hose, fittings, adapters, and completed assembly.
Ordering Information
Manufacturer: Steam-Brite
Bundle Part Number: 20261022
Product: SAE 100R5 Hydraulic Hose Field Repair Kit
Bundle Quantity: 4 Pieces
Reusable Hose Ends: 2
Swivel Adapters: 2
Pipe Connection Size: 3/8"
Hose Compatibility: Manufacturer-Approved SAE 100R5 Only
FINAL HOSE COMPATIBILITY REMINDER
This kit is designed for compatible SAE 100R5 textile-covered hydraulic hose.
It is NOT a universal repair kit for pressure washing, carpet cleaning, tile cleaning, or conventional SAE 100R1 hydraulic hose.
Verify hose compatibility before purchasing.
The Steam-Brite 20261338 reusable hydraulic hose fitting is designed for field installation on compatible 3/8" ID single-wire braided pressure hose. When installed correctly, this fitting allows a damaged hose end to be replaced without using a hydraulic hose crimping machine.
Completely depressurize the hose and disconnect it from the equipment. Using a handheld grinder equipped with a suitable cutoff wheel, a hacksaw, or an appropriate hose-cutting tool, cut the damaged hose end off as straight and square as possible.
Remove any loose rubber, metal reinforcement fragments, and cutting debris. Make sure the hose opening is clean, round, and free of obstructions.
Slide the outer reusable fitting collar over the freshly cut hose end. Rotate the collar counterclockwise to thread it onto the outside of the hose.
Continue threading the collar onto the hose until the hose end reaches the internal stop at the bottom of the collar, following the fitting manufacturer's specified insertion depth.
Apply a suitable lubricant compatible with the hose material and the fluid being conveyed to the threaded insert and the inside of the hose opening, as permitted by the fitting manufacturer.
Position the threaded insert squarely into the hose opening. Carefully engage the insert with the outer collar and rotate the insert clockwise to begin assembly, provided this matches the manufacturer's specified thread direction.
Using appropriate wrenches, hold the outer collar stationary while tightening the threaded insert. Continue until the fitting reaches the manufacturer's specified assembled position or tightening specification.
The insert should fit snugly. However, if excessive resistance occurs, stop and inspect the hose and fitting for incorrect sizing, misalignment, or damaged threads. Do not force the fitting together.
After assembly, inspect the fitting to confirm that the hose is properly seated, the collar has not shifted, and the threaded insert is fully installed according to the manufacturer's instructions.
Before returning the hose to service, follow the applicable manufacturer's inspection and pressure-testing procedures. Keep personnel clear of the hose and connections during testing.
English
French
Spanish
German
Italian
Portuguese
