G27100-0404 for only $12.13 - Steambrite's price on the Miscellaneous Repair Parts - G27100-0404 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Gates Reusable Hose Repair End — 1/4" ID Single-Wire Hose × 1/4" Male Pipe

Repair or build a compatible single-wire braided pressure-hose assembly without a hydraulic crimping machine. This straight, field-attachable hose end connects approved 1/4-inch inside-diameter SAE 100R1 Type AT hose to a 1/4-inch male pipe connection.

Suitable for compatible carpet-cleaning and tile-cleaning pressure-hose applications when the hose, fitting, fluid, pressure and temperature requirements are met.

Specifications

Part Number Cross-Reference and Comparison Guide

The Gates numbers below identify the same Gates item. Other brands are cataloged comparison fittings with matching nominal hose and male-pipe sizes. Matching sizes do not establish universal interchangeability. Check the exact hose series, outside diameter, cover thickness, assembly instructions and service ratings before substituting a fitting. Use a complete matched fitting; do not mix stems and sockets from different fitting systems.

Additional Historical Reference

Aeroquip FC7985-0404S appears in the historical 100R1 TTC reusable fitting family with -04 hose size and 1/4-18 male pipe threads. Later listings associate this fitting with GH663 hose. Treat it as a hose-specific comparison, not as approval for use on any single-wire hose. Confirm the current manufacturer hose/fitting combination. Aeroquip catalog.

Butler P2014244 is an association carried on the existing Steam-brite listing. Independent Butler documentation has not been verified; confirm the Butler part and hose specification before ordering by this reference.

Check Your Hose Before Ordering

• Confirm the hose is 1/4-inch ID and an approved single-wire SAE 100R1 Type AT construction. Hose ID alone does not establish fit.
• Confirm the connection is 1/4-inch male tapered pipe. JIC flare, BSP and SAE straight-thread connections are different.
• Confirm hose outside diameter and cover thickness against the fitting manufacturer's specification.
• For two-wire SAE 100R2 hose, select the appropriate two-wire fitting. For example, Couplamatic 403R-2 and Kurt MP-04-04-R2R are different products.
• Use the manufacturer's approved assembly ratings for the fluid, temperature and pressure in your application. A reusable fitting does not increase the hose's rating.

Frequently Asked Questions

Does this require a hose crimper?

No. This is a field-attachable reusable design. Installation must follow the instructions for the actual fitting and hose combination.

Are MIP and MPT the same size description?

Both terms describe a male pipe end in this listing. The comparison fittings shown use a nominal 1/4-inch pipe connection; manufacturer catalogs may identify the thread as NPT or NPTF. Verify the mating connection and sealing requirements.

Is this a swivel fitting?

No. This listing is for a rigid / solid male pipe end. Swivel versions have different part numbers.

Will it fit every 1/4-inch pressure hose?

No. The hose construction, outside diameter, cover thickness and manufacturer-approved fitting combination must match. Single-wire braid alone is not sufficient confirmation.

Installation should be performed by a qualified individual using the fitting manufacturer's instructions. View Steam-brite's field-attachable coupling instructions.