USED ORIGINAL 2-WIRE BLOWER ASSEMBLY
This is a used, machine-harvested component. It is not the current new Dri-Eaz 122846 four-wire retrofit kit.
Used Dri-Eaz 08-00257 2-Wire Blower Motor and Fan Assembly for DrizAir 1200 F203 Dehumidifier
Original-style used blower motor and fan assembly removed from a Dri-Eaz DrizAir 1200 dehumidifier. The donor dehumidifier was taken out of service because its sealed refrigeration system lost refrigerant—not because of a known blower failure.
Important wiring notice:
This listing is for an older 2-wire version. Dri-Eaz subsequently changed this blower assembly to later three-wire and four-wire replacement configurations. Compare your existing blower, wiring, connector, mounting arrangement, machine model, and photographs before ordering.
Product Details
| Condition |
Used, machine-harvested component |
| Original Part Number |
Dri-Eaz 08-00257 / 0800257 |
| Later Cross-References |
102564 and current retrofit number 122846 |
| Wiring Configuration |
2-wire legacy version |
| Voltage |
115 volts AC |
| Frequency |
60 Hz |
| Legacy Motor Rating |
Approximately 1.76 amps and 1,550 RPM—verify the label on the photographed item |
| Intended Machine |
Dri-Eaz DrizAir 1200 dehumidifier, including applicable F203 configurations |
| Quantity Available |
Limited used inventory; typically one unit unless otherwise stated |
Why This Part Was Harvested
This blower was removed from a dehumidifier that was retired after the refrigeration system developed a refrigerant leak. A refrigerant leak affects the sealed compressor, evaporator, condenser, or connecting refrigerant circuit and does not automatically indicate a problem with the air-moving blower assembly.
The working history of the donor machine is provided to explain why usable parts were removed. Used components can show dust, scratches, oxidation, discoloration, residue, tool marks, label wear, or other evidence of prior installation.
Part-Number and Wiring History
| Part Number |
Version or Status |
| 08-00257 / 0800257 |
Original legacy blower assembly; this used listing is the 2-wire configuration shown in the photographs |
| 102564 |
Later replacement commonly identified as a 3-wire version |
| 122846 |
Current manufacturer retrofit commonly supplied in a 4-wire configuration |
Do Not Order by Part Number Alone
Dri-Eaz changed the motor, wiring, connectors, brackets, and installation arrangement during the production life of this machine. The fact that 102564 or 122846 superseded an older number does not mean this used two-wire assembly will plug directly into every later machine.
Verify Before Ordering
- Confirm that your machine is a Dri-Eaz DrizAir 1200.
- Locate the model and serial-number label on your dehumidifier.
- Count the wires on your original blower motor.
- Compare the wire colors, terminals, plugs, and connectors.
- Compare the blower wheel, housing, brackets, mounting holes, and dimensions.
- Compare your original motor label with every available listing photograph.
- Determine whether your machine has previously been modified with a retrofit kit.
- Confirm that you have the electrical and mechanical ability to install a used legacy component.
What Is Included
You will receive the used blower motor and fan assembly shown in the current Steam-Brite product photographs. No additional retrofit wiring, control board, capacitor, fasteners, mounting hardware, brackets, insulation, instructions, or other dehumidifier components are included unless they are clearly photographed and specifically stated in this listing.
Original screws, wire retainers, connectors, brackets, insulation, seals, or mounting hardware from your machine may need to be reused.
Used-Equipment Condition
This is not a new or remanufactured part. Cosmetic wear is normal and may include dust, dirt, staining, scratches, oxidation, faded printing, minor surface corrosion, or residue from its previous installation. Cosmetic appearance does not determine compatibility.
The photographs are part of the product description. Please enlarge and inspect every image before purchasing. When only one used assembly is available, the photographed item is intended to represent the actual unit being offered.
Installation and Safety Notice
Disconnect the dehumidifier from electrical power before opening the cabinet. Installation should be performed by a qualified appliance or restoration-equipment service technician familiar with line-voltage electrical systems.
Incorrect wiring can damage the blower motor, control board, wiring harness, or other machine components and may create a risk of electrical shock, overheating, or fire. Steam-Brite does not provide machine-specific rewiring or retrofit instructions for installing an older two-wire blower into a machine originally configured for another version.
Used Electrical Part Return Notice
All sales are final on this used electrical component.
Compatibility must be confirmed before purchase. This item is not returnable after installation, wiring, modification, disassembly, connection to electrical power, or attempted use.
Buyer is responsible for diagnosis, compatibility, installation, wiring, and confirming that another defect in the dehumidifier will not damage the replacement blower.
Frequently Asked Questions
Is this the new Dri-Eaz 122846 retrofit kit?
No. This is a used original-style two-wire blower assembly harvested from an older dehumidifier. The current 122846 replacement is generally supplied as a revised four-wire retrofit.
Why was the donor dehumidifier dismantled?
The donor machine was removed from service because its sealed refrigeration system lost refrigerant. The blower was harvested so that serviceable legacy components could be reused.
Does a refrigerant leak mean the blower is defective?
No. The refrigeration circuit and the blower are separate systems. However, this remains a used component and is sold according to the condition, testing information, and photographs stated in this listing.
Will it replace part 102564 or 122846?
It may fit certain earlier DrizAir 1200 configurations, but it is not the same wiring version as the later replacements. Physical and electrical compatibility must be verified before ordering.
Can I convert my four-wire machine back to this two-wire motor?
Steam-Brite does not recommend or provide instructions for unapproved wiring conversions. Purchase this item only when its configuration matches the blower and machine application you are repairing.
Dri-Eaz, DrizAir, and Legend Brands are trademarks of their respective owners. Steam-Brite is an independent equipment and replacement-parts supplier. Manufacturer part numbers are provided for identification and cross-reference purposes. Specifications, compatibility information, and part-number supersessions are subject to revision. Buyer must verify the exact application before ordering.
Frequently Asked Questions
Does part 122846 replace Dri-Eaz 102564?
Yes. Part number 122846 is the current retrofit replacement commonly identified for the older 102564 blower assembly.
Does it also replace 08-00257?
Yes. The original 08-00257 number was superseded by 102564, which was later superseded by the current 122846 retrofit kit.
Will the replacement look exactly like my original blower?
Not necessarily. Manufacturers may revise motors, wiring, connectors, mounting brackets, fan wheels, or included hardware while maintaining the intended replacement application.
Does this fit every Dri-Eaz dehumidifier?
No. This listing is specifically intended for compatible DrizAir 1200 F203 and F203-A applications. Do not order solely because another Dri-Eaz machine uses a 115-volt blower.
Can electrical parts be returned after installation?
Electrical components should be inspected and verified before installation. Installed, wired, modified, or energized electrical parts are generally not considered new and unused.
Ordering Checklist
- Confirm the machine is a Dri-Eaz DrizAir 1200.
- Confirm model F203 or F203-A where applicable.
- Compare your original number with 08-00257, 102564, or 122846.
- Inspect the existing wiring and mounting arrangement.
- Have the machine serial number available if additional verification is needed.
Image and specification notice:
Product photographs are provided for identification and general reference. Manufacturers may change the appearance, wiring, motor supplier, brackets, hardware, or packaging without notice. Orders are fulfilled according to the manufacturer part number shown in the listing rather than the appearance of an older product photograph.
Dri-Eaz and DrizAir are trademarks of their respective owner. Steam-Brite is an independent equipment and replacement-parts supplier. Specifications and part-number information are subject to manufacturer revision without notice.
English
French
Spanish
German
Italian
Portuguese
