

Clean Storm 10" BRUSHES, Turbobrite Replacement Circular Centering Brush, Polypropylene Bristles for 1.5in Wand Vacuum Tube, Surface Cleaning Tool
Description
The Clean Storm 10" BRUSHES Turbobrite Replacement Circular Centering Brush optimizes 1.5-inch vacuum tube extraction tools by delivering maximum agitating action and precise tool centering. Constructed with chemical-resistant polypropylene bristles and a durable high-impact housing, this brush attachment restores cleaning power for hard surface tile and grout scrubbing applications.
Features
- Heavy-duty chemical-resistant polypropylene bristles resist wear from harsh carpet and tile cleaning solutions.
- Engineered 10-inch circular design maintains steady positioning and prevents uneven wand drag on floors.
- Integrated 1.5-inch center collar slip-fits securely over standard commercial vacuum extraction tubes.
- High-impact composite ring construction protects surrounding baseboards, furniture, and walls from scuffs.
- Optimizes solution containment while maximizing mechanical agitation on grout lines and uneven hard surfaces.
Applications
- Clean Storm Turbobrite 10-inch hard surface extraction tools and rotary spinner attachments.
- Standard 1.5-inch vacuum wand tubes used with portable carpet extractors and commercial truckmount systems.
- Commercial tile and grout cleaning, concrete scrubbing, and hard floor restorative maintenance environments.
Specifications
| Brand |
Clean Storm |
| Product Name |
Turbobrite Replacement Circular Centering Brush |
| Overall Brush Outer Diameter |
10 Inches |
| Center Tube Collar Diameter |
1.5 Inches (Standard Vacuum Wand Fitment) |
| Bristle Material |
Polypropylene Synthetics |
| Housing Material |
High-Impact Composite Molded Plastic |
| Primary Application |
Hard Surface Agitation & Extraction Wand Centering |
| Chemical Compatibility |
Alkalines, Acid Rinses, & Standard Tile Cleaning Agents |
| Operating Temperature Rating |
Up to 180°F (82°C) Continuous Liquid Exposure |
Cross-Reference SKUs
| Clean Storm 10 BRUSHES |
| CleanStorm 10BRUSHES |
| Turbobrite 10in Brush |
| 10 BRUSHES |
| 10BRUSHES |
| Clean Storm Turbobrite Brush Attachment |
| 1.5 Inch Tile Wand Centering Brush |
| Rotary Spinner 10 Inch Replacement Ring Brush |
Tips and Additional Information
Pre-Installation Inspection & Fitment: Verify that the 1.5-inch vacuum wand tube is thoroughly cleaned and free of debris or burrs before sliding the replacement centering brush onto the tool shaft.
Installation Alignment: Ensure the circular brush ring sits flush against the spray head housing to prevent pressure drift or uneven bristle contact with the floor surface.
Maintenance & Care: Rinse bristles with clean water after exposure to aggressive alkaline presprays or acidic tile restoration chemicals to prolong bristle memory and structural life.
Frequently Asked Questions
Q: Will this 10-inch brush fit non-Clean Storm 1.5-inch extraction wands?
A: Yes, as long as the outer diameter of the wand vacuum tube is 1.5 inches and accepts a circular glide ring, this brush collar will mount securely.
Q: Is this brush suitable for use with high-temperature hot water extractors?
A: Yes, the polypropylene bristle ring is rated for standard carpet and tile cleaning water temperatures up to 180°F.
Q: How do I replace the old brush ring on my tool?
A: Slide off the existing retaining clips or collar stops on your 1.5-inch wand shaft, remove the worn brush, slide the new Clean Storm brush into position, and re-tighten the mounting fasteners.
Warranty & Safety Information
Manufacturer Warranty: Covered by a 90-day limited warranty against manufacturer defects in materials and workmanship under normal commercial operation.
Warranty Exclusions & Safety Warnings: Warranty is voided if the brush is subjected to operating temperatures exceeding 180°F, exposed to unapproved solvent-based strippers that compromise synthetic polymers, or operated on dry, highly abrasive concrete surfaces without solution flow. Always depressurize liquid lines and disconnect vacuum power before inspecting or swapping tool attachments.
|