Clean Storm 20220209, Hot Water Auto Fill Hose Kit 6 ft 1-2 Inch ID Brass Garden Hose Adapters for Carpet and Tile Cleaning
Description
The Clean Storm 20220209 Basic Hot Water Auto Fill Hose Kit supplies continuous hot water up to 200 degrees F from bathroom sinks and shower pipes to carpet extractors and tile cleaning pumps. This 6-foot industrial transfer hose assembly features a 1/2-inch inner diameter and a space-saving 90-degree female swivel elbow designed to clear tight sink basins without kinking or restricting water flow. Equipped with a standard 3/4-inch male garden hose connection and two solid brass plumbing adapters, this complete bundle connects directly to standard 15/16-inch or 13/16-inch faucet aerator threads as well as standard 1/2-inch shower arms. Rated for 200 PSI working pressure and 800 PSI burst pressure, it serves reliably as both a high-temperature auto-fill supply line and an auto-dump discharge hose for commercial extraction equipment.
Features
90-Degree Swivel Elbow Fitting: Compact right-angle female garden hose end prevents hose kinking and allows full water flow inside shallow or narrow bathroom sinks.
High-Temperature Rated Construction: Engineered to safely transfer hot tap water up to 200 degrees F without softening, swelling, or degrading.
Heavy-Duty Pressure Rating: Built to withstand 200 PSI continuous working pressure and an 800 PSI burst threshold for demanding commercial cleaning environments.
Complete Brass Adapter Bundle: Includes both a dual-thread sink faucet adapter (15/16-inch and 13/16-inch to 3/4-inch GHT) and a solid brass shower head pipe adapter (1/2-inch FIP to 3/4-inch GHT).
Dual-Purpose Hose Functionality: Standard 3/4-inch male garden hose outlet accommodates both auto-fill inlet ports and auto-dump discharge lines on portable extractors.
High-Flow 1/2-Inch Inner Diameter: Maximizes water volume delivery to keep up with high-demand carpet cleaning extractors, truck mounts, and tile pressure pumps.
Applications
Portable Carpet Cleaning Extractors with Auto-Fill and Auto-Dump Systems (including US Products, Mytee, Ninja, and Sandia models)
Truck Mount Carpet Cleaning Fresh Water Supply Tank Hookups
Hard Surface and Tile Cleaning High-Pressure Pump Water Feeds
Residential and Commercial Bathroom Vanity Sinks (15/16-inch-27 and 13/16-inch-27 Aerator Threads)
Standard Residential and Commercial Shower Head Pipes (1/2-inch NPT/FIP Threads)
Video
VIDEO
Specifications
Brand
Clean Storm
Kit Part Number
20220209
Hose Length
6 Feet (72 Inches)
Hose Inner Diameter
1/2 Inch (0.50 in)
Hose Inlet Connection
3/4 Inch Female Garden Hose Thread (FGHT) 90-Degree Swivel
Hose Outlet Connection
3/4 Inch Male Garden Hose Thread (MGHT)
Faucet Adapter Threads
15/16 Inch-27 Male / 13/16 Inch-27 Female to 3/4 Inch Male Garden Hose Thread (MGHT)
Shower Adapter Threads
1/2 Inch Female Iron Pipe (FIP) to 3/4 Inch Male Garden Hose Thread (MGHT)
Adapter Material
Machined Solid Brass
Maximum Working Pressure
200 PSI
Minimum Burst Pressure
800 PSI
Maximum Operating Temperature
200 Degrees F (93 Degrees C)
Hose Color
Black (Default; color may vary based on stock availability)
Included
Cross-Reference SKUs
20220209
Clean Storm 20220209
20130305
Clean Storm 20130305
291A
FGHA
AX22
1665-0273
16650273
Kaivac FGHA
20180916
Clean Storm 20180916
Tips and Additional Information
Pre-Installation Inspection: Before connecting to any residential or commercial water fixture, inspect the rubber washers inside the 90-degree female hose fitting, the faucet adapter, and the shower pipe adapter. Ensure all elastomeric gaskets are seated flat and free of cracks or debris to prevent leaks.
Thread Sealing and Alignment: Garden hose connections (GHT) rely on compression against an internal rubber washer rather than thread interference. Hand-tighten all garden hose fittings until snug, then apply a gentle quarter-turn with pliers if needed—do not over-tighten, as excessive torque can deform the washer or strip brass threads. When installing the 1/2-inch FIP shower adapter onto a shower arm, apply 2 to 3 wraps of PTFE thread seal tape clockwise around the male shower pipe threads if the shower arm does not seat cleanly against the internal washer.
Live Swivel Mechanics: The 90-degree female end features a non-live swivel nut designed to spin freely during installation so the hose can be oriented cleanly out of the sink basin without twisting. Once pressurized, avoid forcefully rotating the hose body against stationary brass fittings.
Frequently Asked Questions
Q: Will this faucet adapter fit both male and female threaded bathroom sink faucets?
Yes. The included brass faucet adapter (Part 291A / AX22 / 1665-0273) features dual-thread geometry. Once you unscrew the existing aerator from the sink spout, the adapter threads onto standard 15/16-inch-27 female spout threads as well as most 13/16-inch-27 male spout threads, converting either style to a standard 3/4-inch male garden hose connection.
Q: Why is a 90-degree fitting necessary on the sink end of the hose?
Standard straight garden hose fittings protrude downward and hit the bottom of shallow bathroom vanity sinks, causing severe kinking at the hose neck that chokes off water flow to your extractor or pressure pump. The 90-degree elbow redirects the hose horizontally immediately at the faucet outlet, clearing the sink basin and maintaining full 1/2-inch ID flow.
Q: Can I use this hose assembly to drain waste water from my carpet extractor?
Yes. Because the outlet end uses a standard 3/4-inch male garden hose thread and features a wide 1/2-inch inner diameter rated up to 200 degrees F, it can be connected to the auto-dump discharge port on compatible carpet extractors to route hot wastewater into a floor drain or toilet.
Q: Is this hose safe to use on the high-pressure discharge side of a carpet cleaning wand or tile spinner?
No. This hose is rated for a maximum working pressure of 200 PSI and is strictly intended for low-pressure water supply transfer (auto-fill) and gravity/pump-out drainage (auto-dump). Never connect it downstream of a high-pressure solution pump.
Warranty & Safety Information
Warranty Coverage: Covered by Clean Storm standard manufacturer warranty against defects in materials and workmanship under normal commercial operating conditions. Warranty coverage is void if the hose or brass fittings are subjected to pressures exceeding 200 PSI, temperatures exceeding 200 degrees F, harsh chemical solvents, freezing conditions with trapped water, or physical damage caused by crushing, abrasion, or improper tool use.
Safety Warnings & Operating Limits: Do not exceed the maximum working pressure of 200 PSI or maximum fluid temperature of 200 degrees F. Always verify tap water temperature before pressurizing the line; scalding hot water can cause severe burns if a connection is loosened while under pressure. Shut off the sink or shower water valve and relieve line pressure before disconnecting any fitting. Inspect the hose outer jacket and brass couplings prior to each job and immediately replace the assembly if bulging, blistering, cracking, or thread damage is observed.