Clean Storm 20220829 Bundle PumpTec 80346 Water Otter 1200PSI Pressure Washer Pump AW104 SX12 Tile Spinner Wand GTIN NA [20220829]

Click to enlarge

Your Price: $2,166.77
Part Number: 20220829
Quantity:
Estimated shipping cost: $ 79.00

PumpTec 80346 Water Otter 1200 PSI Pressure Washer Pump AW104 SX12 Tile Spinner Wand Air Mover Starter Bundle 20220829

Bundle includes:

HydroForce New SX-12 Tile Cleaning Tool SX12 AW104 Wand 40300 Air Mover 1610-8235

PumpTec 80346 Water Otter 1200 PSI Pressure Washer Pump For Tile Carpet Cleaning Shock Wave with Connection kit 20220217

Description

Pumptec gold water otter misting system pump

Turn any portable extractor into an incredible tile and grout machine with the Water Otter! (Carpet cleaning water pick up or shop vacuum system and vacuum and solution hoses are not included in the bundle.)
The worlds #1 best selling carpet and tile cleaning pump. This is the same pump installed under the hood of 90% of the tile cleaning machines on the market today. By hooking your pressure hose to the Water Otter instead of your portable extractor, you'll get 1200 psi of raw power to blast grout lines clean! Now you just need to hook your vac hose to your portable extractor, and put on a good tile and grout tool (SX-12 or Gekko come to mind) and you're ready to clean tile with the best! Clean at 500 psi for carpet cleaning or turn it down to 200 psi for upholstery cleaning. Also used as a high pressure misting system pump.

Specification

Commercial Duty
American-Made Pump and Motor
1,000 - 1,200 psi, 2.2 GPM at Nozzle Tip (turn down pressure if you like to as low as 200 psi)
14.3 Amp High Efficiency Motor
Maintenance-Free 1,200 psi Pump
1,000 Hour Continuous, Full Load Rated
Simple Repair, Low Cost Parts
Each Component The Best Available
GFCI with 35' Cord (120 volt versions only)
Female Garden Hose Inlet
1/4 Female Quick Connect Outlet
Max Water Temperature 140 degrees
120 Volt, 8 to 15 amps (depending on pressure), 240 volt version is this amp draw cut in half.
fitted with an m44 motor, this is the motor used for a hard surface pumping system that is outside the extractor case.
Does come with a pressure gauge.
Out of box measurements 14" X 11" 11" H
Shipping wt: 50#s
Shipping dimensions: 20" X 16" X 15"
Amp draw is 7.5 amps to turn on + 1 amp for each 200 psi you ask it to push. Example 500 psi uses 10 amps @ 120 volts

Parts list

Brochure

Start Up Procedures

PumpTec Warranty Info

Pressure washer motor information below:
water otter tile cleaning pump for carpet cleaners

water otter tile cleaning pump for carpet cleaners

Video

Note Pumptec Dealers do not receive the faucet adapter, connection hose, or free sipping. Just the pump at dealer prices + shipping

Pictures

West pak tile cleaning and carpet cleaning pump

Hydro-Force SX12 AW104 - Tile Cleaning Tool FREE Air Mover

Description:

The latest technology for cleaning tile and grout! The SX-12 blasts soil and dirt from tile, grout, and smooth or rough hard surfaces. The rotary arm spins to create amazing soil blasting power working from 700 to 1,500 psi, while the vacuum ports pick up all the waste. Aerodynamically engineered radial vacuum line creates a laminar-flow vortex in the cleaning head that allows the SX-12 to remove water twice as fast as competitive models The SX-12 is ready to work with truckmount carpet machines, pressure washers and vac systems, or the HydroForce high pressure portable extractors
2" OD vacuum hose connection

Final shade or color is not guaranteed on either the wand or the air mover, but blue color are the default for both.

Features:

Works with front-to-back and side-to-side motion.
Works on uneven stone or tile surfaces or smooth concrete.
Light-weight construction.
Tool length is comfortable for users of all heights.
Non-fatiguing: glides easily over the floor.
Ergonomical Handles are spaced shoulder-width
Easy-pull trigger
Stainless steel handle and high-tech polymer casing will take a beating and ask for more
High-grade ceramic swivel - rebuildable!
Max cleaning temperature is 210 at the machine or 180 degree F at the wand.
High pressure sewer jetting hose used between the trigger and dome.
Low profile: gets under counters or toe kicks
Toe-adjustable vacuum relief lets you adjust the suction strength on the fly
Unique airflow system allows use on portables or truckmounts - both with excellent solution recovery
Stiff nylon brush with skirt - great for stone & concrete
12" Cleaning Path
Simple 2 piece head and brush construction

-FREE Air Mover of our choice of color, brand, size with purchase

Optional
Clean Storm AH46 Vacuum Hose Enlarger Cuff Expander 1.5in Threaded X 2.0in Slip 19-027 579-012
If you want to use with 1.5" ID vacuum hose, purchase this optional hose cuff!
Screws onto 1.5" id hose, slip over the 2" wand pipe.

Specifications:

SX-12 (New) After 2021

Spec Sheet
Parts Breakdown
Manual

SX-12 (Old) Before 2021

Spec Sheet
Schematics
Manual

SX-12 (Old) Parts breakdown Before 2021

A - B632 - 1/8" Stainless Steel Veejet Meg 0502 (Old/New)	M - NM4082 - Handle Assembly (Old)
B - NX102 - 10" Stainless Steel Tee Bar with Elbows (Old)	N - BR282 - 90° Brass Elbow - ¼" MPT × ¼" FPT (Old/New)
C - NX101 - 90° Swivel - ¼" In × ³/₈" Out (Old)	O - NA0804 - Brass Strainer Adapter (Old/New)
D - BR260 - 90° Elbow ¼" MPT × ¼" T (Old)	P - NA0803 - Mesh Strainer with out Check Valve (Old/New)
E - NM4090 - SX-12 Roto Molded Head (Old)	Q - NA0802 - ¼" Brass Strainer Body (Old/New)
F - AB50 - SX-12 Brush Skirt (Old)	R - AH102 - ¼" Brass Male Quick Connect (Old/New)
G - NM4084 - ³/₈-16 × 1½" Stainless Steel Screw (Old)	S - 100010 - Spray Gun Handle (Old/New)
H - NM4085 - ³/₈" Stainless Steel Nylock Nut (Old/New)	T - BR272 - Brass 45° Elbow - ¼" FPT × ¼" MPT (Old/New)
I - NM4083 - Black Vacuum Hose - 1" × 9" (Old)	U - NM4081 - 10-32 Stainless Steel Nylock Hex Nut (Old)
J - NM4086 - Vacuum Relief Ring (Old)	V - NM4080 - 10-32 × 1⁵/₈" Stainless Steel Screw (Old/New)
K - NM4087 - ¼-20 × ½" Screw (Old)	W - NA031B - Spray Gun Body (Old/New)
L - NM4089 - ³/₁₆" ×48" Solution Hose (Old)	X - AW104HB - SX-12 Hard Boot Kit (Old)

SEE Comparison Chart: How to Choose the right tile and grout spinner wand size

OEM Associations

Sandia Plastic 10-0859
Powr-flite HP-12 Hydro Wand
KleenRite Pulsar 40300
Aramsco 1637-1609
HydroForce AW104
SX-12
SX12
661767026
MasterBlend 40300
AW104
431100859
1610-8235
CWS-HDS1200
80346
20-0640
AS1200
Cross American Shock-Wave
Factory has used 360U, 356U, and 340U pump heads
PT-80346
13031749333
224520279465
332490529608

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Clean Storm 20220829 Bundle PumpTec 80346 Water Otter 1200PSI Pressure Washer Pump AW104 SX12 Tile Spinner Wand GTIN NA [20220829]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Monday 29 August, 2022.