The Husqvarna Blastrac 1-8DPS30 is a compact, self-propelled 8 inch walk-behind shot blaster designed for concrete surface preparation, coating removal, epoxy floor preparation, garage floors, warehouses, industrial floors, asphalt preparation, and steel surface profiling. The self-propelled drive helps produce a more even blast pattern while reducing operator fatigue compared to push-only machines.
This Steambrite bundle adds practical jobsite value by including a dealer-supplied power supply kit plus a HEPA concrete dust collection package with cyclonic pre-separator and hose. This helps the customer receive a more complete system instead of purchasing the shot blaster alone and then trying to match power cords, dust collection, and hose components later.
Factory supplied machines may not include the exact plug and jobsite power setup every customer needs. Steambrite includes a dealer-supplied power supply kit to help connect the unit to a compatible 240 volt single phase power source. Customer is responsible for confirming outlet type, breaker size, voltage, local code requirements, and jobsite electrical compatibility before operation.
Shot blasting should be performed with proper dust collection. This bundle includes a HEPA concrete dust collection system and cyclonic pre-separator to help capture concrete dust and reduce filter loading. Always follow OSHA silica dust rules, Husqvarna operating instructions, and use proper personal protective equipment.
It is used to strip, clean, and profile concrete, asphalt, and some steel surfaces before applying coatings, overlays, epoxy, sealers, or other floor systems.
Yes. The 1-8DPS30 is self-propelled, which helps create a more consistent blast pattern and reduces operator fatigue.
Yes. This Steambrite bundle includes a HEPA concrete dust collection system with cyclonic pre-separator and hose.
Factory plug and cord configurations can change. This Steambrite bundle includes a dealer supplied power supply kit. Always confirm your jobsite outlet, voltage, breaker, and plug requirements before use.
Production is commonly listed up to 450 - 600 sq ft per hour, but actual results depend on coating thickness, concrete hardness, shot size, desired surface profile, and operator speed.
New improvements make the Blastrac 1-8DPS30 easier to operate and handle. This economical, self-propelled 8” shot blasting system now features drive controls on the steering handle. An EZ-adjust system for the control cage is another new feature that is operator friendly. Laser-cut components and utilization of improved manufacturing technologies along with a powder-coat finish helps assure quality construction and long life.
The 1-8DPS30’s self-propelled operation improves productivity and promotes a more even and consistent blast pattern and surface profile. It consumes abrasive at less than 9 lb. per hr. and strips, cleans and profiles in one easy step to prepare concrete surfaces prior to application of coatings or overlays. Ideal for industrial floors, warehouses, commercial or residential garage floors, this shot blaster can prepare up to 450 to 600 sq. ft. per hour. The 1-8DPS30 is also perfect as a complementary unit for larger shot blasters. Blasting Width: 8 in. (203 mm) Travel Speed: Self-Propelled Prod. Capacity: Up to 600 sq.ft./hr Power: 4 HP, 230V (30 amp) 1Ø Power Cord: 35ft. (10.66m) Dust Vacuum Hose Connection: 3 in. ID (76mm) Dimensions: L 51in x W 16in x H 47in (1295mm x 406mm x 1193mm) Weight: Net 275 lbs No Factory male plug provided, Use NEMA L6-30P with provided kit. Payment by wire transfer only. Owners Manual
English
French
Spanish
German
Italian
Portuguese
