Legend Brands 105574 Sapphire Scientific 67-084 14-Inch PTFE Glide for Titanium Wand (OEM Part)

Factory DISCONTINUED / Limited stock item — 2026-09-09 ONLY 4 REMAINING IN STEAM-BRITE STOCK

This genuine Legend Brands / Sapphire Scientific replacement glide is no longer available for factory drop shipment.

Genuine Original-Equipment Replacement: This is an authentic Legend Brands / Sapphire Scientific 105574 (67-084) glide—not a generic aftermarket copy. It was manufactured for the original 14-inch Sapphire titanium wand to provide the correct external-fit profile, slot alignment and secure fit. Match your existing part number and wand-head configuration before ordering. Steam-Brite has four pieces physically in stock in San Antonio, Texas. Availability is limited to stock on hand and cannot be replenished after the remaining inventory is sold.

Legend Brands Part Number: 105574  
Sapphire Scientific Part Number: 67-084
Product Type: External-fit replacement wand glide
Material: PTFE polymer (commonly called Teflon)
Nominal Size: 14 inches
Quantity: One glide

Verified Wand Compatibility

• Sapphire Scientific 67-080 — 14-inch low-profile six-jet titanium Ergo wand
• Sapphire Scientific 67-081 — 14-inch low-profile six-jet titanium standard wand
• Legend Brands 114762 — crossover for Sapphire 67-080
• Legend Brands 115096 and later 116599 references — associated 14-inch titanium wand configurations; verify the existing glide style before ordering

Prochem / Kärcher reference: The complete 14-inch titanium wand is also identified as Prochem / Kärcher 8.632-690.0 (86326900). That number identifies the complete wand, not this glide. The verified replacement-glide numbers are 105574 and 67-084; no separate authoritative Kärcher-formatted glide number has been confirmed.

Important Fitment Information

This is the original external-fit 14-inch glide that wraps around the outside lips of the compatible titanium wand head. It is not the newer internal press-fit glide. Internal-fit and external-fit versions are not interchangeable without the applicable wand-head conversion components.

Do not order by cleaning width alone. Inspect the existing glide and wand-head lips, and match part number 105574 or 67-084 before purchase.

Does not fit: Sapphire 12-inch wand 67-082. That wand uses 67-085 / Legend Brands 117192.

Benefits of Replacing a Worn Glide

• Reduces drag for easier forward and backward cleaning strokes
• Helps reduce operator fatigue during extended carpet-cleaning jobs
• Supports concentrated airflow and effective water recovery
• May improve drying performance when replacing a worn, damaged or poorly sealing glide
• Helps keep the metal wand-head edges from dragging directly across carpet fibers

Specifications

What Is Included

One Legend Brands 105574 / Sapphire Scientific 67-084 glide. The titanium wand, wand head, jets, valve, hoses, mounting or conversion components and other accessories are not included.

Installation and Care

Depressurize and disconnect the cleaning wand before service. Remove the worn glide carefully and clean the wand-head mounting surfaces. Install the replacement evenly without cutting, overheating or distorting the PTFE. Confirm that it is fully seated and secure before returning the wand to service. Periodically inspect the glide for thinning, grooves, cracking, loose edges and uneven wear.

Final-sale fitment notice: This discontinued replacement part is sold by exact part number. Compare your old glide and wand-head configuration before ordering. Display images are for reference; fulfillment is based on the ordered part number.