

Clean Storm 20200923, 33 ft Vent Cleaning Air Hose System, 1/4in NPT Blow Gun to 1/8in QD for Skipper Balls Air Whips
Description.jpg)
Clean Storm 20200923 33-foot vent cleaning air hose system provides superior directional control and gentle cleaning for dryer vents and flexible ducting when paired with skipper balls and air whips. Engineered to protect delicate vent walls, this system uses high-velocity air attachments instead of harsh brushes to prevent tears and structural damage. The complete assembly features a durable 90 PSI squeeze-trigger blow gun for precise airflow regulation and rapid shutoff, connected to a 33-foot rigid sewer jetting hose designed for easy pushing through long duct runs. Equipped with a standard 1/4" NPT Male QD inlet and a 1/8" Female QD outlet featuring a specialized pressure-release design, it keeps attachments securely locked and prevents tool loss inside ductwork during intense cleaning cycles.
Features
- High-Flex Rigid Sewer Hose Construction: 33-foot specialized rigid hose provides optimal column strength to push effortlessly through tight bends, flex ducts, and extended vent runs without kinking.
- Ergonomic Squeeze-Trigger Control: Heavy-duty 90 PSI rated blow gun provides comfortable, fine-tuned airflow management and instantaneous air shutoff for operator safety.
- Safe Non-Abrasive Cleaning: Operates via targeted air pressure to clean dryer vents without abrasive wire or plastic brushes that can rip or perforate flexible ducting.
- Pressure-Release Attachment Lock: Equipped with a 1/8" Female Quick Disconnect incorporating a safety pressure-release feature that stops accidental detachment inside vent walls.
- Versatile Hose Adaptation: Standard 1/4" Male NPT input quick disconnect is fully removable, allowing direct adaptation to larger high-flow air supply lines.
- Corrosion-Resistant Hardware: Fitted with zinc-plated steel and brass pneumatic quick disconnects for long-term corrosion resistance in humid exhaust environments.
Applications
- Residential and Commercial Dryer Vent Cleaning: Safe removal of packed lint, debris, and obstructions from rigid sheet metal and flexible foil ducting.
- HVAC Air Duct Maintenance: Thorough air flushing of branch runs using skipper balls, reverse nozzles, and forward air whips.
- Flex Duct Restoration: Cleaning sensitive vinyl, aluminum, and wire-reinforced flexible transition ducts without causing mechanical punctures.
- Air Whip and Skipper Ball System Integration: Direct connection to all standard air duct cleaning tools from Clean Storm, Nikro, and Heat Seal.
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20200923 |
| Hose Length |
33 Feet (10 Meters) |
| Hose Type |
Rigid Sewer Jetting / Vent Jetting Air Hose |
| Maximum Operating Pressure |
90 PSI |
| Inlet Connection Thread / Fitting |
1/4" NPT Male Quick Disconnect (Removable 1/4" MIP connection) |
| Outlet Connection Thread / Fitting |
1/8" Female Quick Disconnect (Pressure-Release Lock) |
| Control Mechanism |
Hand-held Squeeze-Trigger Air Blow Gun |
| Body & Fitting Materials |
Zinc-Plated Steel, Machined Brass, Reinforced Polymer Hose |
| Compatible Attachment Brands |
Clean Storm, Nikro, Heat Seal, and standard 1/8" Male QD air whips |
| Swivel Type |
Non-Live (Static Installation Fitting) |
| Operating Temperature Range |
32°F to 140°F (0°C to 60°C) |
Video
Cross-Reference SKUs
[' cleanstorm 33 ft air hose ']
| Clean Storm 20200923 |
| 20200923 |
| CleanStorm 20200923 |
| CS-20200923 |
| Clean Storm Vent Hose 33ft |
| Air Whip Hose Kit 20200923 |
| Skipper Ball Vent Hose System 33 |
| Nikro Air Whip Hose Assembly Compatible |
| Heat Seal Dryer Vent Hose Assembly Compatible |
Tips and Additional Information
Proper Thread Sealing & Assembly: Apply 2 to 3 wraps of PTFE thread seal tape or a medium-strength thread sealant to the 1/4" NPT threads before threading the quick disconnect into the blow gun body. Ensure threads are cleanly aligned to prevent cross-threading and maintain an airtight seal up to the maximum operating pressure.
Pre-Installation & Inspection: Prior to each job, inspect the 33-foot hose for outer jacket abrasion, kinks, or fitting movement. Check the 1/8" female quick disconnect locking collar to verify that internal retention bearings move freely and engage fully onto your skipper ball or air whip stem.
Live vs. Non-Live Operation Notice: The quick disconnect fittings on this assembly are non-live swivel connections designed for quick tool installation and setup. They are NOT continuous live rotary unions. Do not allow the hose or attached tools to spin continuously under high rotation, as this will wear out internal O-ring seals and cause premature pressure loss.
Operating Safety & Attachment Retention: Always depressurize the hose line before changing attachments. Ensure the 1/8" pressure-release quick disconnect fully snaps onto the male plug of your skipper ball or air whip to avoid leaving tools inside inaccessible vent runs.
Frequently Asked Questions
Q: What size attachments fit the end of this vent cleaning hose?
A: The end of the hose features a 1/8" Female Quick Disconnect (QD), which directly accepts standard 1/8" Male QD stems commonly found on skipper balls, air whips, and reverse nozzles from Clean Storm, Nikro, and Heat Seal.
Q: Can I connect this system to a standard 1/4" compressor air hose?
A: Yes. The blow gun is equipped with a standard 1/4" Male NPT Quick Disconnect inlet, allowing instant connection to any standard 1/4" quick-connect air line. If needed, the fitting can be removed to access the 1/4" MIP threads directly for custom hose adaptation.
Q: Is this hose flexible enough to navigate 90-degree elbows in dryer vents?
A: Yes. The 33-foot rigid sewer jetting hose is specially formulated to balance pushing rigidity with bend radius capability, allowing it to navigate standard 3-inch and 4-inch dryer vent turns without buckling.
Q: Does this hose require thread sealant on the quick disconnect fittings?
A: NPT tapered threads (such as the 1/4" MIP inlet to the blow gun) require PTFE tape or pipe thread sealant to guarantee an airtight seal. Quick-disconnect couplings seal internally via compressed O-rings and do not require tape on the quick-connect mating surfaces.
Q: What working pressure should I use with this air whip system?
A: The blow gun and hose assembly are rated for a maximum operating pressure of 90 PSI. Operating within 70 to 90 PSI delivers maximum air agitation efficiency while protecting quick-disconnect couplings and vent duct walls.
Warranty & Safety Information
Manufacturer Warranty Coverage: Clean Storm products are backed by a 90-day standard manufacturer warranty against defects in materials and workmanship from the date of purchase. Warranty coverage applies to normal commercial or residential vent cleaning use when operated within specified pressure and temperature thresholds.
Conditions That Void Warranty: Warranty coverage is voided under the following conditions: operating the assembly above the maximum rated pressure of 90 PSI; exposing the hose to temperatures exceeding 140°F (60°C); using non-live fittings in continuous high-speed rotary applications; operating with aggressive solvent chemicals or non-pneumatic liquids; cross-threading fittings during installation; or subject to physical crush damage, severe outer jacket abrasions, or unapproved structural modifications.
Operational Safety & High-Pressure Hazards: Always wear eye protection and protective gloves during air duct cleaning operations. Never disconnect air hose lines or quick-disconnect fittings while the system is pressurized. Ensure all quick-disconnect locks are fully engaged prior to inserting tools into ductwork to prevent high-pressure disconnect hazards and accidental tool loss.
|