Clean Storm 20241006 Wall Mount Pressure Washer 3 Gpm 3000 Psi 200 Ft Live Hose Reel 150 Ft Hose and

Clean Storm 20241006 Wall Mount Pressure Washer 3 Gpm 3000 Psi 200 Ft Live Hose Reel 150 Ft Hose and Lance Included [20241006]

Click to enlarge

Your Price: $2,164.66
Part Number: 20241006
Quantity:
Estimated shipping cost: $ 223.00

Product Options
Extended Warranty:
Shipping Surcharges:

Clean Storm 20241006 Wall Mount Pressure Washer 3 Gpm 3000 Psi 200 Ft Live Hose Reel 150 Ft Hose and Lance Included

Video in Action
https://youtube.com/shorts/y5ENB769noI
and
https://youtube.com/shorts/IgLUvy1AtQQ
and
https://youtube.com/shorts/Y7d-RXUS1lE?si=l4B-7uGX8A8-3IzX

5 Hp 184T Frame Energy-mizer Leeson Pump motor Specificity designed to receive F17 Water pump (this means it accepts four 1"L X 1/2" machine bolt pattern that the F17 Flange can bolt on to.)
21 amps 240 volts single phase 1750 Rpm
Leviton 30 amp 240 volt 2-Pole Motor Starter switch installed in Type 1 Enclosure
4 ft of power cord with NEMA 14-50P factory or dealer installed. (we can quote longer lengths to 10 feet)
Can be powered with a 30 amp 240 volt single phase wall outlet.
On this photo we used a NEMA 14-50 Plug as this customer already had this outlet in the garage.

Mounted on a 48" W X 11.5" Deep x 3/4" Shelf board.
(4) 10" Heavy duty 90 degree wall brackets.
Mounting lag wall hardware bolts is not included as you will need to use they best type of mounting hardware for your wall type. Example CMU wall or metal studs are totally different mounting system than wood stud as shown here on these example photos.
On this photo we use 1/4" X 2" Zinc Hex cap lag screws attached to wood wall studs.

Note this motor weight is 80 lbs alone. Final assembly is 160 lbs. I notice some slight bending in the 4 wall brackets so will be adding a eyelet loop higher up on the wall stud and attaching to the electric motor top crane lift hole with a ratchet strap to share some of the load.
We are using a 4.0 (instead of the 3.0) Roll over nozzle lessen the pressure just a bit while keeping the water volume up, as this customer was going to use to clean both cars, Rv, and concrete. For automotive paint do not go past 2500 psi. This assembly is going to be hooked to the 120 degree F hot soft water conditioned of the home Manabloc water management system.

wall mount pressure washer

Some parts used for the build:

AR Pump XMA3G30E-F17, Replacement Pressure Washer, 3 gpm 3000 psi 1750 rpm
The -F17 means pump will have a hollow shaft to receive the 5 Hp electric motor shaft (see photo above.)
Water pump rated for 165 degree F hot water (normal tap water temp 120 degrees is fine)
Factory supplied 5 year limited warranty against defects.

Clean Storm 200Ft Industrial 4000 Psi Hot Water Rated Power Wash Live Hose Reel 20244416
'Live' means the water pressure passes from the pump through the center hub of the hose reel and stays connected full time to allow you to use as much or a little hose length you want without having to disconnect the hose from the reel

Clean Storm Hose 150 ft X 3/8 in ID X 1 wire 4000 psi 3/8 in Mip x Swivel 13459843
Rated for water up to 250 degrees F.

AR VRT3-310 Unloader 8 Gpm Black Spring Top 4500 Psi - 8.750-299.0
Fully adjustable unloader to adjust pressure on this system between 2000 and 3000 psi.

Pressure Washer Jumper Hose 10.5 Inch OVL X 3/8 Mip X 3/8 Mip X 3/8 ID X 4000 Psi X Rubber Jacket 9 Inches 20240927
Used to connect the pump head pressure gauge to the live hose reel.

Clean Storm BR254, 3/8in Mip X 3/8in Fip X 3/8in Fip Street Run Tee Brass, 28247
Used to mount the pressure gauge.

Clean Storm A00168 3/8in Mip X 1/4in Fip Brass Bushing Adapter AKA 28104L 8.705-129.0
Used to mount pressure gauge.

Pressure Gauge 5000 Psi S.S. Back connection 8.914-832.0 [89148320] LFG-PM-5000
Pressure gauges last the longest if you use at a 2 to 1 service factor ratio. Since this pressure washer will be used mostly at 2500 psi we installed a 5000 psi gauge.

Clean Storm Pressure Washing Lance 36In Insulated Molded Grip 5250PsiX1/4inMip 8.752-894.0 V36ICS DL36ICS [87528940]

Mecline MV925 Gun Easy Pull Trigger Assembly 4500psi 320 degrees F 8gpm 8.754-907.0 - 8.754-769.0 - 8.751-231.0- 9.802-223.0

Clean Storm 119020 Pressure Washing Multipattern Rollover Spray Nozzle With QC 4 gpm 3600psi 56612
Video On Link!

Karcher 8.712-466.0 Gun Swivel Dvg 3/8 Nptf 4000Psi /Ss
Installed on MV925 water inlet for easier use of pressure washing lance and gun assembly.

3/8in Fip X 3/8in Fip Steel Swivel Hydraulic Adapter Fitting Not Live 1405-6-6 [1405-0606] AD6FP-6FPX
Used to connect the 200 ft live reel to the 9" jumper hose.

Karcher 8.707-103.0, Pressure Washer QD, 1/4in Fip X 1/4in Female Socket Coupler, Stainless Steel - 87071030 - 2-2000SS
Installed on end of the 36" lance to allow you easy access to change pressure washing tips, nozzles, and accessories.

Karcher 8.707-152.0, 3/8 Male Pipe X 3/8 Male Nipple Plug, Pressure Washing Stainless Steel Quick Coupler, 87071520 QD
Installed onto Pressure washing gun swivel

Pressure Washer QD 3/8in Fip X 3/8in Female Socket Coupler Stainless Steel, 8.707-125.0 Kaivac CPS39 87071250
Installed onto the end of the 150 feet of water pressure line.

Tips and notes:

Optional
Clean Storm Water Rotary Turbo Laser Nozzle 500 to 3000 psi HOT 3.0 gpm Rotojet 3000030 For Pressure Washing
We also sold this customer this above accessory nozzle for when super aggressive cleaning is wanted at 3000 psi.
Example concrete curb and rock cleaning. This will also require the purchase of a 1/4" male plug coupler to snap into the end of the spray lance.

Optional
Ls3 Adjustable Foamer 8.710-124.0 344026 87101240 Foam Cannon Clean Storm Snow Foamer Lance 3200 PSI 85.400.048

The 150 ft solution hose is one side swivel and one side fix/rigid 3/8" Male pipe. I used the swivel side of this hose to attach to the live reel swivel so the entire hose would not have to be spun to install. Instead I added a swivel to the gun/trigger side with the additional gun swivel assembly.

Change oil at 50 hours of break in use and then every 200 hours after this point.

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Clean Storm 20241006 Wall Mount Pressure Washer 3 Gpm 3000 Psi 200 Ft Live Hose Reel 150 Ft Hose and Lance Included [20241006]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Friday 04 October, 2024.

Product Datasheet

20241006 for only $2,164.66 - Steambrite's price on the Wall Mounted Pressure Washer - 20241006 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Clean Storm 20241006 Wall Mount Pressure Washer 3 Gpm 3000 Psi 200 Ft Live Hose Reel 150 Ft Hose and Lance Included