PMF S1540P 30in Clear Head Stair Tool Wand - 8in Head - 120 PSI

PMF Part Number: S1540P 
Alternate / Reference Number: AW20
Tool Length: 30 Inches
Cleaning Head: 8 Inch Clear Plastic Head
Maximum Pressure: 120 PSI
Valve: V120 Plastic Valve
Jet: Brass Vee Jet

IMPORTANT: THE PMF S1540P IS A 120 PSI CLEAR-HEAD STAIR TOOL DESIGNED FOR LOW-PRESSURE CARPET EXTRACTION APPLICATIONS.

The PMF S1540P is an economical professional 30-inch stair cleaning wand featuring an 8-inch clear plastic extraction head. Its compact head and long handle make it useful for cleaning carpeted stairs, edges, crevices, automotive carpet, and other confined areas where a conventional full-size carpet cleaning wand is difficult to maneuver.

The clear head gives the operator visibility into the extraction area while cleaning. The S1540P is equipped with a 120 PSI V120 plastic solution valve, brass Vee jet, and a padded assist handle for improved control.

PMF S1540P Specifications

30 Inch Clear Head Stair Cleaning Wand

The 30-inch length provides additional reach compared with short upholstery and detail tools while remaining compact enough for stair cleaning.

The 8-inch clear plastic head is especially useful on carpeted stair treads, risers, edges, and other areas where a standard carpet wand may be too large or cumbersome.

120 PSI Low-Pressure Stair Tool

The PMF S1540P is rated for a maximum of 120 PSI and uses PMF's V120 plastic valve. Do not exceed the manufacturer's rated operating pressure.

This is the economical clear-head model in PMF's stair-tool lineup and should not be confused with higher-pressure stainless-steel PMF stair wands.

Clear 8 Inch Extraction Head

The clear plastic head allows the technician to see through the extraction head during operation. This can help provide visual feedback while extracting carpeted stairs and detailed areas.

Because the head is plastic, PMF offers optional AC33-8A stainless-steel glides designed to help prevent wear to the plastic head.

Optional Stainless Steel Glides

PMF recommends AC33-8A stainless-steel glides to help prevent wear on the S1540P plastic head.

The stainless-steel glide set is an optional accessory and is not included unless specifically selected or purchased separately.

Typical Applications

• Carpeted stair treads
• Carpeted stair risers
• Carpet edges
• Crevices and confined carpeted areas
• Automotive carpet
• RV and marine carpet
• Detail extraction cleaning
• Areas difficult to reach with a full-size carpet wand

Quick Disconnect Information

A solution-line quick disconnect is not included with the PMF S1540P. Add the appropriate male or female quick disconnect if required for your carpet extractor or solution hose configuration.

What's Included?

• 1 PMF S1540P 30-inch stair tool
• 8-inch clear plastic extraction head
• V120 120 PSI plastic valve
• Brass Vee jet
• Padded assist handle

Quick disconnects, extraction machine, vacuum hose, solution hose, and optional AC33-8A stainless-steel glides are not included unless specifically stated or selected.

Important Pressure Information

Maximum operating pressure: 120 PSI.

This model should not be substituted for PMF's higher-pressure stair tools when higher solution pressures are required. Always operate the tool within the manufacturer's specified pressure rating.

Specifications are subject to manufacturer changes. Product images are for reference. Orders are fulfilled according to the manufacturer's part number shown above.

Please add connectors to your shopping cart...

Foster: 1/4in Male Brass Quick Disconnect QD


Foster: 1/4in Female Brass Quick Disconnect QD


Foster: 1/4in Male/Female Set Brass Quick Disconnect QD